KA350i Version 1.1 (SP1 - 1.1.29) [UPDATED MAY 24]

Locked
Turbofandude
Posts: 141
Joined: Thu Mar 12, 2015 1:53 pm
Location: United States
KA350i Version 1.1 (SP1 - 1.1.29) [UPDATED MAY 24]

Post by Turbofandude » Mon Apr 20, 2020 10:46 pm

Hello all,

Version 1.1.29 (the revised GM of the "1.1" SP1 update) is now available here:
High Resolution - http://milviz.com/Online_products/Produ ... 200524.zip
Low Resolution - http://milviz.com/Online_products/Produ ... 24_Low.zip

Please FULLY uninstall the previous version of the aircraft before installing this one.

Changes from 1.1.28 (May 24, 2020)
PL21
-Advisory VNAV fix

Visual
-Minor texture fix



Changes from 1.1.27 (May 20, 2020)
FMS-3000
-Fixed runway being inserted for CTL (RNVA) approaches



Changes from 1.1.26 (May 15, 2020)
Visual
-Various improvements



Changes from 1.1.25 (May 14, 2020)
PL21
-FMS TEXT fix

Visual
-Prop level both fix
-Night lighting fixes



Changes from 1.1.24 (May 13, 2020)
PL21
-Various fixes and code cleanup

Visual
-Various fixes



Changes from 1.1.23 (May 11, 2020)
Visual
-Reduced and optimized textures to improve VRAM consumption



Changes from 1.1.22 (May 8, 2020)

Various minor fixes and improvements

Changes from 1.1.21 (May 7, 2020)
FMS Changes
-Fixed a filtering issue
-Various fixes

PL21
-Various fixes

Visual
-RealLight fixes
-Various fixes



Changes from 1.1.20 (May 5, 2020)
FMS Changes
-Fixed a minor text alignment issue

Visual
-RealLight fixes
-Various fixes



Changes from 1.1.8 (April 27, 2020)
FMS Changes
-Fixed a crash relating to FPLN approach display
-Fixed approach naming
-Fixed a scenario causing the runway to be inserted after the missed approach point

Systems
-Fixed an inversion in the hardware mapping system

Visual
-Various updates



Changes from 1.1.7 (April 23, 2020)
Systems
-Various updates
-Updated RealLight to new beta version

Visual
-Fixed cabin door night lighting

PL21 Changes
-Fixed FMS text issue



Changes from 1.1.6 (April 21, 2020)
Systems
-Updated MV_WXM

Visual
-Fixed a minor texture issue



Changes from 1.1.3 (April 10, 2020)
FMS Changes
-Fixed incorrect removal of terminal legs over en-route waypoints
-Fixed reversed hours and minutes on MARK POINTS page
-Fixed incorrect month on MARK POINTS page
-Fixed GNSS ALT and HEIGHT not displaying
-Fixed a potential issue with screen refreshing
-Fixed a potential issue with brightness
-Fixed a procedure turn issue
-Fixed a possible crash entering leg winds
-Fixed enroute time not displaying properly on the FLIGHT LOG page
-Fixed landing time not displaying properly on the FLIGHT LOG page
-Fixed a SID/STAR/APPR filtering issue
-Fixed FMS not turning off
-Fixed a minor FMS TEXT issue

Systems
-Fixed an issue preventing the ESIS menu from working under some conditions
-Fixed RTU brightness not being honored by the popup
-Fixed a single nav radio ILS issue
-Fixed an issue with data saving/loading
-Fixed several various potential leg indexing issues
-Fixed duplicate camera ID

PL21
-Fixed a leg indexing related CTD
-Fixed airplane symbol displaying in unscaled insets on charts
-Fixed a chart boundary clipping issue
-Fixed non-geo-referenced charts displaying the aircraft symbol
-Night mode charts

Visual
-Fixed missing labels on the right side PFD
-Fixed disconnected trim rods
-Fixed an issue causing higher VRAM usage and FPS impact
-Added windshield icing



I have done my best to summarize changes from the last public release below. There are likely many more changes that I did not list.

Changes from 1.0.1 (Dec 23, 2019)
FMS Changes
-Fixed cycle dates showing yellow at all times
-Fixed broken "NEW HOLD" LSK
-Fixed reverse wind entry
-Fixed issue with entering small negative coordinates
-Fixed typos/display inaccuracies on the ARRIVAL DATA page
-Fixed broken duplicate waypoint selection on PERF TRIP page
-Fixed incorrect elevation display on ARRIVAL DATA page
-Fixed incorrect default hold data
-Fixed airport position initialization not entering departure airport
-Added RX## waypoint system for VECTOR approaches
-Fixed overly restrictive filtering behavior
-Fixed incorrect departure/arrival/approach filtering
-Fixed broken SEC FPLN ROUTE MENU link
-Fixed SEC FPLN page change behavior
-Fixed labeling of SEC FPLN DEPART/ARRIVE pages
-Fixed ability to select transitions when not displayed
-Corrected "NBDs" typo
-Fixed procedure name designations
-Corrected (as much as possible) the behavior of the "RWY" text on the legs page
-Fixed localizer data not showing all runways
-Fixed inability to use LSK-copy method to copy waypoints further down the flight plan
-Changed default HOLD speed
-Added ability to display TEARDROP and PARALLEL HOLD entry type
-Fixed erroneous "CANCEL HOLD" display
-Fixed page indexing issue with departure runway selection
-Fixed FIX INFO drawing
-Added FIX INFO intercept calculation (first pass, WIP)
-Fixed incorrect duplicate leg detection
-Fixed incorrect leg sequencing when adjusting a SID/STAR
-Made DIR TO after auto sequence inhibit revert to auto sequence
-Fixed unintentional modification/data updating of active legs from the DIRECT TO history
-Moved ini locations for better re-usability
-Moved pilot route location for better re-usability
-Added Navigraph chart viewer system
-Improved FIX INFO entry and display
-Fixed inabilty to enter VERTICAL DIR TO altitude via scratchpad
-Made editing TO leg directly perform DIR TO
-Improved display of DIR TO vertical fields
-Improved restriction of DIR TO vertical entry
-Fixed inability to reselect an approach after passing the missed approach point
-Discontinuities are no longer inserted after the departure for empty flight plans
-Made an internal change to prevent multiple DIRECT TO objects from being created
-Fixed an issue incorrect reselection of the FROM LEG when changing a STAR/APPR
-Fixed font size on DEP/ARR pages
-Fixed clicking DEP/ARR from the ARRIVAL page not returning to DEP/ARR INDEX
-Various other fixes
-Fixed leg text copying on FPLN page
-Fixed a CTD related to certain leg entry
-Switched flyover handling internally to prevent unneeded @ display
-Fixed hold exit prompt text
-Made modifying leg flyover behavior cause a flight plan modification
-Fixed name of certain HOLDs
-Fixed ability to improperly copy current position before entry
-Fixed an issue potentially incorrectly deleting legs
-Fixed incorrect leg wind entry index
-Allowed copying of leg wind data
-Made HOLD portion of missed approach remain when new approach is selected
-Fixed missing designation for certain approaches
-Fixed certain FIX behavior
-Fixed VA/CA overfly
-Going DIR to a non-flightplan waypoint during a HOLD now advances the hold behind the (DIR) object
-Made airport/runway DIR TO use proper DIR TO system
-Made insert/non-FPLN DIR TO within MAP portion of FPLN erase subsequent map legs
-Improved selection/resetting of ILS data
-Fixed re-selection of STAR/APPR from leg control after completing MAP
-Fixed detection of waypoint chains for dissimilar object types
-Fixed incorrect double-insertion of holds under certain conditions
-Fixed incorrect DIR INTC CRS entry behavior
-Fixed SP RNG number accuracy
-Fixed inability to enter VNAV DESCENT TGT SPEED
-Fixed TRANS ALT display on VNAV CLIMB page
-Fixed TRANS FL display on VNAV DESCENT page
-Fixed inability to enter C/F on TEMP COMP page
-Fixed inability to delete marked points
-Fixed inability to edit second marked point description on each page
-Fixed wrong line select copying marked point latitude/longitude
-Various leg/calculation fixes
-Added automatic setting of vertical usage based on surrounding waypoints (closing gaps)
-Added additional parameters to the runway leg for visual approaches
-Fixed hard-coded "SGF" text on FIX page
-Fixed FROM leg EFOB updating
-Fixed EFOB calculation issue
-Fixed inability to enter ISA DEV properly on LEG WIND page
-Allowed copying of leg ISA deviation

Systems Changes
-Corrected ATC ID of liveries
-VCP improvements
-Removed invalid panel.cfg entry
-Removed invalid aircraft.cfg light entries
-Removed "repair" and "modify" installer options to prevent unintentional de-activation
-Made fuel/payload stay as-is when startup scenario is set to current conditions
-Added check box to enable/disable hardware mapping
-Missing panel bitmap added

PL21 Changes
-Fixed a possible CTD relating to changing flight plans
-TAWS No longer causes erroneous alerts on load
-Fixed display of charts when CHARTS menu was re-opened
-Doubled resolution of PFD and MFD for better readability
-Allowed zoom, pan, and rotation of charts
-Added moving airplane symbol to charts display for geolocated charts
-Added procedure turn arrow display
-Updated size of flight plan arrow
-Made arrow not appear at incorrect times
-Fixed screens not clearing and redrawing fully
-Fixed drawing of runways for visual approaches
-Fixed FIX display behavior
-Fixed several crashes related to leg indexing
-Fixed RTU/FMS transponder syncing
-Fixed a PLAN related CTD
-Fixed missing RESERVE fuel display on MFD PROG

Visual Changes
-Fixed fire extinguisher indicated level
-Fixed missing texture
-Fixed reversed EMER FREQ
-Fixed the GND COMM and EMERG FREQ buttons
-Fixed reversed animation of right aileron trim movement
-Fixed cabin-side cabin door lighting
-Added wing views

In addition to the list above, significant improvements have been made to the following areas:
  • Leg sequencing
  • Leg location/prediction calculations
  • VNAV
  • LNAV
  • DIR TO and leg insertion behavior
  • Overall systems accuracy
  • Overall model accuracy
  • Overall texture accuracy
  • Overall night lighting accuracy

FinnJacobsen
Posts: 87
Joined: Tue Apr 17, 2018 1:03 pm
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by FinnJacobsen » Mon Apr 20, 2020 11:37 pm

I have a MV_WXM.dll crash running P3D V4.5 HF3 with an error message telling that MV_WXM.dll isn´t compatible with my Flightsim version.

Has 1.1.6 not been tested with HF3 ?

MV_WXM.dll is version 1.44.0.1

Raptor
Posts: 411
Joined: Wed Feb 26, 2014 3:07 am
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by Raptor » Tue Apr 21, 2020 3:05 am

Delete or rename MV_WXM.dll

C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\MV_King_Air_350i\Panel

frmdes
Posts: 22
Joined: Mon Jan 06, 2020 10:06 pm
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by frmdes » Tue Apr 21, 2020 3:21 am

Just installed 1.1.6 version, and i had a CTD when i clicked EXEC button trying to insert a route.

URCTBASE.DLL fault error.

i tryied to insert this plan:

Departure: SBCF
Destination: SBRP

MUGR1B MOTMA Z73 RPR

when i inserted the fix RPR in FMS and clicked the EXEC, the sim chrashed.

FinnJacobsen
Posts: 87
Joined: Tue Apr 17, 2018 1:03 pm
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by FinnJacobsen » Tue Apr 21, 2020 5:57 am

Raptor wrote:
Tue Apr 21, 2020 3:05 am
Delete or rename MV_WXM.dll

C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\MV_King_Air_350i\Panel
Does that not leave the KA350i without WX radar ?

bmw969
Posts: 101
Joined: Mon Feb 10, 2020 8:24 pm
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by bmw969 » Tue Apr 21, 2020 7:09 am

Same mistake
Image

But I did not find this file

Image

henrik.bergvin
Posts: 81
Joined: Sun Apr 12, 2020 9:56 pm
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by henrik.bergvin » Tue Apr 21, 2020 9:21 am

Just installed and I'm seeing faded/dark annunciators on the lower panel:
Image

They're set to bright (pushed in), here's the overhead: Image

Previous version fully uninstalled before installing the new version.

Edit: Some of the text didn't paste into the post..

I'm running P3D v4.5 HF2 (haven't installed HF3 yet), with modified shaders via TomatoShade (no change in those between KA350i 1.06 and SP1). I'm also running REX SkyForce, but I do not believe these are the cause. The upper annunciators are bright and shiny, but the lower are incredibly dim. Other panel lights such as gear lights and Prop Sync are looking good.
Last edited by henrik.bergvin on Tue Apr 21, 2020 11:04 am, edited 1 time in total.

terjekj
Posts: 10
Joined: Thu Jan 02, 2020 9:42 am
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by terjekj » Tue Apr 21, 2020 10:16 am

Between version 1.1.3 and 1.1.6, I've lost a good 20 fps. Had 33-35 fps average in previous versions, in 1.1.6 it's a slideshow at 10-15 fps while airborne.

tcarter.67
Posts: 47
Joined: Sat Dec 21, 2019 10:32 pm
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by tcarter.67 » Tue Apr 21, 2020 11:43 am

Gotta say I’m a bit disappointed by this one. 1.3 seems to work much better despite a few bugs on my system. Will test further and report back over the next few days.

FinnJacobsen
Posts: 87
Joined: Tue Apr 17, 2018 1:03 pm
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by FinnJacobsen » Tue Apr 21, 2020 12:40 pm

Where are the dev's and moderators ?

Raptor
Posts: 411
Joined: Wed Feb 26, 2014 3:07 am
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by Raptor » Tue Apr 21, 2020 1:05 pm

FinnJacobsen wrote:
Tue Apr 21, 2020 5:57 am
Raptor wrote:
Tue Apr 21, 2020 3:05 am
Delete or rename MV_WXM.dll

C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\MV_King_Air_350i\Panel
Does that not leave the KA350i without WX radar ?
Yes, The fix for the wx radar will be released in a couple days. You will be able to fly the 350 in HF3 until then

tredsell
Posts: 18
Joined: Sun Dec 22, 2019 10:32 am
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by tredsell » Tue Apr 21, 2020 1:17 pm

Hi Guys,

I'm fortunate that I am not having the performance drop as others have noticed, however a couple of points if thats ok.

I have a stutter that lasts a couple seconds every time I trigger the engine start on either side - been around since day 1 - I wonder could it be the introduction of the second texture for blurred props, but it is quite noticable and occurs the moment you flick the switch.

I also find that when entering airways into the FMS, entering the close out point for the airway 'to' fix also triggers a stutter. (Loading FP in TFDI format only ever gives me the DIRECT fixes until first airway, rest of plan goes AWOL)

I also noticed the VNAV speed in the FMS perf page shows 'Resume VNAV speed 320Kt', not entirely sure how that could be, however, it might be a coincidence that the mach number on conversion in the climb is .32?

I had a CTD about 10 mins into flight, but nothing in event viewer so will just have to try again to find the cause!

Thanks for the build!

Raptor
Posts: 411
Joined: Wed Feb 26, 2014 3:07 am
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by Raptor » Tue Apr 21, 2020 1:24 pm

For the people with performance issues, Could I recommend you clear your shaders folder? I see a noticeable improvement when I do. Specially after a hotfix

https://www.avsim.com/forums/topic/4796 ... -v2-v3-v4/

tredsell
Posts: 18
Joined: Sun Dec 22, 2019 10:32 am
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by tredsell » Tue Apr 21, 2020 1:25 pm

Raptor wrote:
Tue Apr 21, 2020 1:05 pm
FinnJacobsen wrote:
Tue Apr 21, 2020 5:57 am
Raptor wrote:
Tue Apr 21, 2020 3:05 am
Delete or rename MV_WXM.dll

C:\Program Files\Lockheed Martin\Prepar3D v4\SimObjects\Airplanes\MV_King_Air_350i\Panel
Does that not leave the KA350i without WX radar ?
Yes, The fix for the wx radar will be released in a couple days. You will be able to fly the 350 in HF3 until then
Does this mean using the same method the KA might run in V5? I have not risked it yet but would be great if it were possible

Taguilo
Posts: 658
Joined: Sun May 11, 2014 11:49 am
Re: KA350i Version 1.1 (SP1 - 1.1.6)

Post by Taguilo » Tue Apr 21, 2020 2:42 pm

frmdes wrote:
Tue Apr 21, 2020 3:21 am
Just installed 1.1.6 version, and i had a CTD when i clicked EXEC button trying to insert a route.

URCTBASE.DLL fault error.

i tryied to insert this plan:

Departure: SBCF
Destination: SBRP

MUGR1B MOTMA Z73 RPR

when i inserted the fix RPR in FMS and clicked the EXEC, the sim chrashed.
Hi,

How did you load that FP? Entering all data from FPLN page? Entering departure from DEP/ARR pages? Entering some info in LEGS page?

Thanks.

Tomas


Locked

Return to “K.A.350 Support Forum”