J/S versions doesn't work C&D
-
farman
- Posts: 231
- Joined: Tue Jan 20, 2015 12:58 am
J/S versions doesn't work C&D
Hi,
while the C&D state works perfectly for the E version, this doesn't happen for the ADV J/S. 2/3 seconds after switching the right engine, sound disappears and it's all over. All freezes.
Not so important, I can start with the ready to fly function, but I should like if I'm making something wrong.
Just installed the latest ADV version.
Thanks for any help,
Fulvio
while the C&D state works perfectly for the E version, this doesn't happen for the ADV J/S. 2/3 seconds after switching the right engine, sound disappears and it's all over. All freezes.
Not so important, I can start with the ready to fly function, but I should like if I'm making something wrong.
Just installed the latest ADV version.
Thanks for any help,
Fulvio
-
JonathanBleeker
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: J/S versions doesn't work C&D
Which simulator?
-
farman
- Posts: 231
- Joined: Tue Jan 20, 2015 12:58 am
Re: J/S versions doesn't work C&D
The last one, P3D v4.5. Some problem with this one for the J/S version?
-
JonathanBleeker
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: J/S versions doesn't work C&D
What's your base installer package version number?
-
farman
- Posts: 231
- Joined: Tue Jan 20, 2015 12:58 am
Re: J/S versions doesn't work C&D
Hi,
base package is vA1.17220. But I realize I've just received from you the vA1.180712. I guess I have to install this last one, correct? But strangely, the very same older J version does work properly.
BTW, I have to install both the 180712 versions + the ADV ones. is it so?
base package is vA1.17220. But I realize I've just received from you the vA1.180712. I guess I have to install this last one, correct? But strangely, the very same older J version does work properly.
BTW, I have to install both the 180712 versions + the ADV ones. is it so?
-
farman
- Posts: 231
- Joined: Tue Jan 20, 2015 12:58 am
Re: J/S versions doesn't work C&D
Hi,
just a brief feedback. Un-installed and re-installed the new versions, but the issue remains. Just after clicking to start the right engine, any action freezes.
just a brief feedback. Un-installed and re-installed the new versions, but the issue remains. Just after clicking to start the right engine, any action freezes.
-
JonathanBleeker
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: J/S versions doesn't work C&D
Was the ADV installer run as admin?
-
farman
- Posts: 231
- Joined: Tue Jan 20, 2015 12:58 am
Re: J/S versions doesn't work C&D
All the add-ons are run as admin.
-
JonathanBleeker
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: J/S versions doesn't work C&D
Please go to start menu->search->Event Viewer->Windows logs->Application and see if there is an error involving P3D or the F-4. Post the text here.
-
farman
- Posts: 231
- Joined: Tue Jan 20, 2015 12:58 am
Re: J/S versions doesn't work C&D
Hi Jonathan,
unfortunately no error in the records. I took a look just one second after trying two times the C&D start, but to no avail.
I'm afraid we'll put this issue in the Sim-unsolved mystery-bucket - this issue happened both in Win7 pro and Win 10 OS and both in the former and last P3D version. And all this after reinstalling all the stuff following the change of the processor (now an Intel i7 7700K).
Thanks for your help, BTW,
Fulvio
PS:The other big mystery remains the P-38 interior lights; they doesn't work at all to all the simmers.
unfortunately no error in the records. I took a look just one second after trying two times the C&D start, but to no avail.
I'm afraid we'll put this issue in the Sim-unsolved mystery-bucket - this issue happened both in Win7 pro and Win 10 OS and both in the former and last P3D version. And all this after reinstalling all the stuff following the change of the processor (now an Intel i7 7700K).
Thanks for your help, BTW,
Fulvio
PS:The other big mystery remains the P-38 interior lights; they doesn't work at all to all the simmers.
-
JonathanBleeker
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: J/S versions doesn't work C&D
I'm not about to give up. I suspect something is preventing the ADV module from loading. Confirm there is a F4_mod.dll in your SimObjects\Airplanes\Milviz Phantom II S/J\panel\F4ADV folder? If it is there, right click on it select properties and check if there is an unblock button/checkbox?
-
farman
- Posts: 231
- Joined: Tue Jan 20, 2015 12:58 am
Re: J/S versions doesn't work C&D
Hi Jonathan,
the only box is in the "Sicurezza (Security)", where I added right now the "Complete control (Controllo completo)". Now I'm flying, but as soon as I end my flight I'll check if something changed. Just for the record, "Consenti"="Allow", "Nega"= "Deny"
Of course I can only but thank you in not giving up.
Write you soon,
Fulvio
the only box is in the "Sicurezza (Security)", where I added right now the "Complete control (Controllo completo)". Now I'm flying, but as soon as I end my flight I'll check if something changed. Just for the record, "Consenti"="Allow", "Nega"= "Deny"
Of course I can only but thank you in not giving up.
Write you soon,
Fulvio
- Attachments
-
- Cattura.PNG (20.66 KiB) Viewed 1435 times
-
JonathanBleeker
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: J/S versions doesn't work C&D
The unblock button should be on the General tab.
-
farman
- Posts: 231
- Joined: Tue Jan 20, 2015 12:58 am
Re: J/S versions doesn't work C&D
Hi Jonathan,
here are the 3 versions .dll properties. To me they look identical (j, s and e).
here are the 3 versions .dll properties. To me they look identical (j, s and e).
- Attachments
-
- Cattura s.PNG (20.3 KiB) Viewed 1433 times
-
- Cattura j.PNG (20.34 KiB) Viewed 1433 times
-
- Cattura e.PNG (19.21 KiB) Viewed 1433 times
-
JonathanBleeker
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: J/S versions doesn't work C&D
I hate to ask this but please do a double check that your P3D is set to run as admin. Sometimes (especially after windows updates) P3D's Run as admin setting gets reset.