Interior Lights

Locked
farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sat Dec 26, 2015 1:43 pm

Hi, here attached the dll files youe were asking for. But in ev'ry case I didn't see the Migration Tool aopening. There are other entries that might be suspect, but I don't dare to delete them. Or at least I might delete them and after that be recraeted by the system, such as scnery.cfg?
Attachments
PrData.LM.P3D.JPG
PrData.LM.P3D.JPG (44.04 KiB) Viewed 2484 times
DLL 1.JPG
DLL 1.JPG (78.19 KiB) Viewed 2484 times
Cattura 2.JPG
Cattura 2.JPG (122.45 KiB) Viewed 2484 times
Cattura 1.JPG
Cattura 1.JPG (117.97 KiB) Viewed 2484 times

hodge001
Posts: 23
Joined: Sat Mar 31, 2012 11:38 pm
Re: Interior Lights

Post by hodge001 » Sat Dec 26, 2015 2:16 pm

Hi

As you say the DLL.xml file does not seem to have the Migration Tool entries in it, so that rules out my theory as to why you have no night lighting
in the Talon, and all the other entries seem to be OK as far as I can see, I think this is one for MilViz to work on as I have run out of ideas as to why
you are having the issue, sorry about that but we tried.

I will keep following this one though as I would really like to know what it was and I suppose you would like to know more than I do.

Good luck on the issue and I am sure you will get this resolved by the MilViz wizards.

Jim Hodkinson

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Sun Dec 27, 2015 5:39 am

I'm starting to think this is another missing libraries issue....Do me a favour and go to your Control Panel->Administrative Tools->Event Viewer-Windows logs->Application right after running the T-38 and see if there are any error reports about the MV_NL.exe.

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sun Dec 27, 2015 7:04 am

Hi,
attached just 2 of the errors found in the log. One is referred to the Phantom (that actually is working fine), the other one is more interesting for you, I guess. There's a long, long list to scroll. I'0m going on in searching, but look at this, gor the moment.
Fulvio
Attachments
MV 2.JPG
MV 2.JPG (68.56 KiB) Viewed 2476 times
MV 1.JPG
MV 1.JPG (75.51 KiB) Viewed 2476 times

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Sun Dec 27, 2015 7:14 am

That tells me it is crashing. Will get back on that....

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sun Dec 27, 2015 10:49 am

JonathanBleeker wrote:That tells me it is crashing. Will get back on that....
Hi,
many thanks. In the meantime let's fly at daytime :D

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Wed Jan 06, 2016 9:59 pm

Hi Jonathan,
just an updatre. after installed P3D v3.1, I un-installed and re-installed the T-38 just to follow the attmpt of another customer (mr Cuco, in another post); unfortunately, to no avail. So, let's wait for some (good and imminent) news.
regards,
Fulvio

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Thu Jan 07, 2016 7:12 am

Ok finally got a chance to do some hands on testing....Please put this in your Milviz Phantom\texture folder overwriting the one that is there. Then right click on it, select properties, and click the Unblock button, and also go to Compatibility settings and select Run this program as admin. Then run the sim. If the NL fails, get the Windows log error report and post here please.

https://www.dropbox.com/s/7uvjx7dsc8xo0 ... L.exe?dl=0

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Thu Jan 07, 2016 7:29 am

Hi Jonathan,
thanks for your answer, but my issue is with the T-38, possibily the MV_NL.exe file. The MV_F4_NL.exe in my Phantoms interior lights are working properly. Or is this en experiment?
Regards,
Fulvio

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Thu Jan 07, 2016 8:00 am

If the Phantom's lights are working correctly then ignore. Will see if I can get a test made with the T-38 NL

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Thu Jan 07, 2016 9:05 am

Fine, Jonathan.

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Thu Jan 07, 2016 9:51 am

farman wrote:Fine, Jonathan.
Just an addendum; even if I can't fly witht he Phantoms, being my P3D v3.1 - and waiting for a next release of an updating -, from the Task manager you can see that the MV_F4_NL is wotking properly. More, in the .exe file I gave ALL the permissions but it doesn't run as Administrator. Nonetheless it's working correctly.
Parhaps this has nothing to do with the T-38; take it as a further updating.
Consentyi=Permission
Attachments
F42.JPG
F42.JPG (67.15 KiB) Viewed 2483 times
F41.JPG
F41.JPG (64.44 KiB) Viewed 2483 times
F4 1.JPG
F4 1.JPG (93.37 KiB) Viewed 2483 times

Chip
Posts: 10
Joined: Fri Jul 15, 2011 12:42 am
Re: Interior Lights

Post by Chip » Fri Jan 15, 2016 12:22 am

I am having the same issues. The .exe is showing in the task manager. I have everything set to Admin Prev. This is happening to 3 Milviz aircraft. (F4, T-38ADV, MD530)in P3Dv3.1.
Otherwise love the work that you guys did....Outstanding!!!

Krazycolin
Site Admin
Posts: 1728
Joined: Mon Sep 08, 2008 4:18 pm
Re: Interior Lights

Post by Krazycolin » Fri Jan 15, 2016 2:15 am

The F-4's won't even work in P3D 3.1 so it's no suprise. The MD530 should, in theory work as should the T-38ADV. This isn't the ADV support forum btw...

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Fri Jan 15, 2016 7:12 am

Since the exe is showing in the task manager, are you running the Estonia migration tool? It interferes with the lighting operation by creating a fake FSX.exe.


Locked

Return to “Northrop T-38A Support Forum”