Interior Lights

Locked
farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sat Feb 27, 2016 4:40 pm

Hi,
don't know if it's linked to the interior lights issue, but from the outside I don't see the afterburner flame when acticated; just its sound.
regards,
Fulvio

spronkj
Posts: 11
Joined: Wed Feb 24, 2016 5:16 pm
Re: Interior Lights

Post by spronkj » Mon Feb 29, 2016 7:33 am

that's an issue I had as well. there was also no glow in the engine nozzles as well. I shut down the engines and restarted them and the glow and the afterburners reappeared. also the landing lights were on with the switch in the off position. When I turned the landing lights off using ctrl + L and then used the switch it then worked properly.

Just some of my experiences with the T-38.

I so like this airplane. I hope the experts have a solution soon!!

ReggieC
Posts: 39
Joined: Wed Jan 20, 2016 12:56 am
Re: Interior Lights

Post by ReggieC » Sat Mar 05, 2016 12:32 pm

If you will go to the other post that I started about the interior lights, they sent me a new .dll for the PANEL file and it fixed the problem for me. You might give that a try.

Reggie

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Wed Apr 06, 2016 5:46 pm

Hi all,
sadly, I'm still flying the T-38 (standard version for P3D v3.2) only by daylight. I just tried to re-install it, give all the permissions, disabled all the anti-virus. All to no avail.
it's a real pity.
Regards,
Fulvio

Krazycolin
Site Admin
Posts: 1728
Joined: Mon Sep 08, 2008 4:18 pm
Re: Interior Lights

Post by Krazycolin » Wed Apr 06, 2016 6:23 pm

I'm sorry Fulvio... but there's not much we can do if you did absolutely EVERYTHING that was suggested...

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Wed Apr 06, 2016 6:25 pm

I'm not going to give up quite yet....I want to double check your lighting exe and dll version numbers please.

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sun Apr 10, 2016 10:56 am

Hi,
thanks for your further help.
Attached my .dll & .exe Lights version. Is this you asked for?
regards,
Fulvio
Attachments
T-38 .exe.JPG
T-38 .exe.JPG (41.73 KiB) Viewed 2233 times
T-38 .dll.JPG
T-38 .dll.JPG (42.67 KiB) Viewed 2233 times

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Sun Apr 10, 2016 11:35 am

Ok you are using the updated versions. Please post the error report from the NL.exe crash so I can trace the offset.

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sun Apr 10, 2016 1:21 pm

Hi Jonathan,
attached the only error I found in the event log. Attached even some shot of the interior (with light test switch ON) and exterior.
Well, from the TM I didn't see any MV_NL.exe start, as per the other MilVIz planes (F-4 and so on).
It's a real mistery; I don't think I'm missing anything, due to the lots and lots of planes I flew so far. Maybe there's some issue that generates some kind of incompatibility betwenn my pc and the T-38. Who knows?
Well, much more important for the F-4 updating to P3D v3.2.
Thanks again for your seriousness and professionalism in coping with this weird problem.
regards,
Fulvio
Attachments
Prepar3D 2016-04-10 14-10-38-07.jpg
Prepar3D 2016-04-10 14-10-38-07.jpg (62.03 KiB) Viewed 2229 times
Prepar3D 2016-04-10 14-08-52-57.jpg
Prepar3D 2016-04-10 14-08-52-57.jpg (92.22 KiB) Viewed 2229 times
Prepar3D 2016-04-10 14-07-44-94.jpg
Prepar3D 2016-04-10 14-07-44-94.jpg (93.68 KiB) Viewed 2229 times
Prepar3D 2016-04-10 14-06-47-79.jpg
Prepar3D 2016-04-10 14-06-47-79.jpg (169.93 KiB) Viewed 2229 times
Prepar3D 2016-04-10 14-06-14-91.jpg
Prepar3D 2016-04-10 14-06-14-91.jpg (186.04 KiB) Viewed 2229 times
Cattura.JPG
Cattura.JPG (80.7 KiB) Viewed 2229 times

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Sun Apr 10, 2016 1:59 pm

Is the MV_NL.exe in your task manager?

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sun Apr 10, 2016 3:38 pm

No, I didn't see it; actually, I even open the TM just remembering this issue in the F-4. But it should be seen, correct?
Just to try a desperate move, what do you think to send me the link to re-download the full T-38 .exe? I apologize in advance if this is an indecent proposal :-)
Fulvio

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sat Apr 16, 2016 10:00 pm

Hi, might I get again the download link that - silly me - I can't actually find in my folders? Who knows, perhaps redownloading and reinstalling it I could recover some missing file or exe. Only a very fa chance, but just to try a last time.
Thanks and regards,
Fulvio

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Interior Lights

Post by JonathanBleeker » Sun Apr 17, 2016 8:42 am

KC? Kat? Can you help him out?

Kat
Posts: 94
Joined: Mon Feb 08, 2016 7:30 pm
Re: Interior Lights

Post by Kat » Sun Apr 17, 2016 4:06 pm

I have sent an email containing the download link via sendowl

farman
Posts: 231
Joined: Tue Jan 20, 2015 12:58 am
Re: Interior Lights

Post by farman » Sun Apr 17, 2016 4:59 pm

Hi Kat, got it. Thanks for your kindness.
Feedback will follow; this time I'll deactivate my Microsoft Antivirus that, anyway, never gave me any problem. But who knows, maybe something happened downloading the T-38 exe; some corrupted file or who the hell knows!
Regards,
Fulvio


Locked

Return to “Northrop T-38A Support Forum”