List of key commands

Find out more before you buy, or chat to other F-15E pilots!
(No support requests please)
JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
List of key commands

Post by JonathanBleeker » Tue Dec 06, 2011 9:21 am

Im putting the key commands and the key events here for those who want to map things to their controls

Radar Cursor range dec: Shift + C KEY_CONCORDE_NOSE_VISOR_FULL_RET
Radar Cursor range inc: Shift + E KEY_CONCORDE_NOSE_VISOR_FULL_EXT
Radar Cursor range inc: Shift + S KEY_DEC_CONCORDE_NOSE_VISOR
Radar Cursor range inc: Shift + F KEY_INC_CONCORDE_NOSE_VISOR

Radar elevation dec: Shift + X G1000_MFD_CLEAR_BUTTON
Radar elevation inc: Shift + W G1000_MFD_CURSOR_BUTTON
(slew the vertical scanned area up and down)

Lock Target: Alt + Space G1000_MFD_ENTER_BUTTON
(Airborne targets and ground position targets not ground vehicles)

Discard Target: Shift + Space G1000_MFD_FLIGHTPLAN_BUTTON

Lock Ground Vehicle Target: Ctrl + Tab (no key event at this time)

Fire gun: CABIN SEATBELT TOGGLE
Release weapon: Shift + D RELEASE DROPPABLE OBJECT

There were some issues with the radar that some of you may have run into and these have been fixed in the patch.

UPDATE: In preparation for the service pack, one extra event has been added. LGBs may miss if you fail on this one....

Laser Arm: Toggle Water Rudder

2 more events....

Chaff: Cowl flaps (close incrementally)
Flare: Cowl flaps (open incrementally)
Last edited by JonathanBleeker on Tue Feb 07, 2012 3:08 pm, edited 2 times in total.

Ken Stallings
Posts: 53
Joined: Sat Aug 14, 2010 12:47 am
Location: Portales, NM
Re: List of key commands

Post by Ken Stallings » Wed Dec 07, 2011 1:40 am

Thanks, Jon! I think this will help the customers a lot!

Cheers,

Ken

Backy
Posts: 16
Joined: Fri Aug 19, 2011 10:24 pm
Re: List of key commands

Post by Backy » Wed Dec 07, 2011 2:43 am

Thanks! Do you know if the CH PT mini-joystick can be programmed as a sensor clew cursor?

Ken Stallings
Posts: 53
Joined: Sat Aug 14, 2010 12:47 am
Location: Portales, NM
Re: List of key commands

Post by Ken Stallings » Wed Dec 07, 2011 2:53 am

I use the CH Fighterstick and programmed one of the four position buttons to slew the radar cursor and it works.

I'm not familiar with the one you are using but I would suspect it would work out the same way.

Cheers,

Ken

Backy
Posts: 16
Joined: Fri Aug 19, 2011 10:24 pm
Re: List of key commands

Post by Backy » Wed Dec 07, 2011 3:41 am

Rog, I also have the Fighterstick. The CH Pro Throttle has a mini-joystick for the left thumb. Essential to fly DCS A-10C, which you should definitely check out as an USAF guy!

Ken Stallings
Posts: 53
Joined: Sat Aug 14, 2010 12:47 am
Location: Portales, NM
Re: List of key commands

Post by Ken Stallings » Thu Dec 08, 2011 12:05 am

Yep, I have one of those also, but no longer use it. Frankly, I cannot recall what you can use it for. I vaguely remember there is a CH utility you can use to assign a function to it.

Ken

corky
Posts: 2
Joined: Sun Dec 04, 2011 1:48 am
Re: List of key commands

Post by corky » Fri Dec 09, 2011 12:34 am

Ken,
The utility you refer to was "Speedkeys". The program does not work with USB controllers so CH even took it down because their customers were raising lots of questions why it didn't work.
I also have the CH Pro Throttle and that thumb thingy is useless as far as I'm concerned. I would like to map it to act as a cursor control but can't seem to find a way.

Sabreliner
Posts: 3
Joined: Sun Dec 04, 2011 1:38 am
Re: List of key commands

Post by Sabreliner » Fri Dec 09, 2011 1:43 am

Hey, I cannot for the life of me get the target lock on keys to work. I mapped the G1000 MFD Enter and Fplan keys in FSX but when I select the target with the cursor (with the radar on), and I get an altitude reading under the target blip, pressing either the G1000 Enter of Fplan keys does nothing. Any suggestions?


Alan Jackson

Ken Stallings
Posts: 53
Joined: Sat Aug 14, 2010 12:47 am
Location: Portales, NM
Re: List of key commands

Post by Ken Stallings » Fri Dec 09, 2011 1:52 am

Alan,

Sorry to mislead you. The radar is having a known problem with the lock command. The good news is that Jon has fixed that bug that unfortunately got in the code somehow at the very end. It worked in the beta's, but sometimes code can get cranky that way!

Sorry for the issues on that one, but when the SP comes out it should be working just fine for you.

Cheers,

Ken

corky
Posts: 2
Joined: Sun Dec 04, 2011 1:48 am
Re: List of key commands

Post by corky » Thu Dec 29, 2011 2:13 am

Backy wrote:Thanks! Do you know if the CH PT mini-joystick can be programmed as a sensor clew cursor?
Did you still need this? I have my CH Pro Throttle minijoy controlling the cursor just fine in the VRS F-18E. I followed the destructions here - it should work just fine in the F-15 as well.

http://simhq.com/forum/ubbthreads.php/t ... ost3124081

Scrolll down about 4/5 of the page and follow the instructions that starts with "Here's a question that gets asked a time or two: How do I get my mini-joystick to press buttons in [ insert sim name that does not support DX axes for a TDC ]?"

Ken Stallings
Posts: 53
Joined: Sat Aug 14, 2010 12:47 am
Location: Portales, NM
Re: List of key commands

Post by Ken Stallings » Thu Dec 29, 2011 4:19 am

[quote="corky"][quote="Backy"].... I followed the destructions here ...... [quote]

Corky,

Is that a Freudian slip there? LOL!!!

Ken

Dagger022
Posts: 3
Joined: Tue Jan 03, 2012 10:05 pm
Re: List of key commands

Post by Dagger022 » Sun Jan 08, 2012 6:44 pm

I have input these commands for the radar cursor. Shift+C, Shift+E and Shift+S move the cursor down, up and left. Shift+F increases the range. What command moves the cursor right?

Radar Cursor range dec: Shift + C KEY_CONCORDE_NOSE_VISOR_FULL_RET
Radar Cursor range inc: Shift + E KEY_CONCORDE_NOSE_VISOR_FULL_EXT
Radar Cursor range inc: Shift + S KEY_DEC_CONCORDE_NOSE_VISOR
Radar Cursor range inc: Shift + F KEY_INC_CONCORDE_NOSE_VISOR

Thank You,
Dagger022

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: List of key commands

Post by JonathanBleeker » Sun Jan 08, 2012 7:00 pm

Shift F is what moves it right. Its a minor bug with the long range modes and it is fixed in the patch. We are just waiting because we have been able to get AUTO bombing mode fixed and it just has a few minor tweaks and we will be ready.

fredjetware
Posts: 2
Joined: Sun Dec 04, 2011 1:19 am
Re: List of key commands

Post by fredjetware » Wed Jan 25, 2012 6:50 pm

Hi

I have some trouble using the radar in A/A mode, the cursor move is ok, but I can't lock target with the key command alt+space, even if i use the fsuipc command G1000 enter.

Other thing I have also the same error when I use the shift+F key command the elevation of the antenna goes up but I can't the antenna get down, when I change radar mode by pressing mfd buttons like SS,VTS,BST or TWS I lose the cursor and the behaviour when I want to push another button is not good. It's impossible to comme back on RWS mode I must turn off the radar and turn on again to reinitiate the radar.

I had proceed to a reinstall , but the problems are still there.

Excuse my bad english I hope it's a bit clearly.

However I like very much your plane , the sound are very authentic incredible.

Thanks a lot.

Fred

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: List of key commands

Post by JonathanBleeker » Wed Jan 25, 2012 7:11 pm

It shouldnt be that way in the patch beta....KC? What gauges did you give them? This was solved right after the initial release.


Locked

Return to “McDonnell Douglas F-15C & F-15E General Forum”