P3DV4.5 HF2 4.5.13.32097

News - all the news for those who don't like social media!

Moderator: N4GIX

Post Reply
Raphael_Chacon
Posts: 27
Joined: Wed Sep 14, 2016 2:40 am
P3DV4.5 HF2 4.5.13.32097

Post by Raphael_Chacon » Mon Sep 30, 2019 11:51 pm

Hello,

Are your products compatible with latest update? P3DV4.5.13.32097

In my case, F4 and UH1..... and of course the WX.....

Thanks for support
Image
PO#0019952663 #SM1788646 #SM1492710

SnuffyTheMongoose
Posts: 298
Joined: Wed Nov 21, 2018 9:00 pm
Re: P3DV4.5 HF2 4.5.13.32097

Post by SnuffyTheMongoose » Tue Oct 01, 2019 3:55 am

Yes

azflyboy
Posts: 357
Joined: Tue Mar 08, 2011 12:51 am
Re: P3DV4.5 HF2 4.5.13.32097

Post by azflyboy » Tue Oct 01, 2019 6:44 am

It's worth mentioning that TacPack isn't compatible with the new hotfix (this doesn't matter if you don't have TacPack), so the weapons on the Phantom and UH-1 won't work until VRS issues a patch that makes TacPack functional again.

User avatar
doodlebug
Posts: 2134
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: P3DV4.5 HF2 4.5.13.32097

Post by doodlebug » Tue Oct 01, 2019 12:21 pm

WX probably not
Oisin Little a.k.a. Osh
Milviz QA/Product Manager

Email is the best way to contact me: info@milviz.com

FSX:SE P3Dv4.5 XP11 Z270X i7-7700 16GB DDR4 GTX1070 Ti Win10 OSX 12.6
ORBx scenery REX environment Chaseplane
P3Dv4.5 HM175 i5-7300HQ 16GB DDR4 GTX1060M Win10

JonathanBleeker
Posts: 9553
Joined: Sat Mar 13, 2010 7:38 pm
Re: P3DV4.5 HF2 4.5.13.32097

Post by JonathanBleeker » Tue Oct 01, 2019 2:09 pm

The WX should work. LM didn't change the weather dll.
-JB

Milviz R&D Lab dev/Resident PITA Perfectionist.


Image
Please read the manual before posting. You will learn quicker than if I act as your instructor.

Raphael_Chacon
Posts: 27
Joined: Wed Sep 14, 2016 2:40 am
Re: P3DV4.5 HF2 4.5.13.32097

Post by Raphael_Chacon » Thu Oct 03, 2019 3:41 pm

Thanks for Tacpack advice..... and thanks for the WX words, i read it was being updated yet, so may be is bettter to "simulate" radar is broke and go flying for now :-)

So ok, reinstalling Phantom and UH1 as well.

Image

Happy Flying!
Image
PO#0019952663 #SM1788646 #SM1492710

qqwertzde
Posts: 57
Joined: Sat Oct 17, 2015 2:18 pm
Re: P3DV4.5 HF2 4.5.13.32097

Post by qqwertzde » Sun Oct 27, 2019 2:27 pm

Can you confirm thet the Turbo Otter works with HF2? On my system, this airplane crashes P3D as soon as a try to load it. I have reinstalled the plane, disabled Reallight, it still crashes.

Peter
System: P3D 4.5 HF2, Windows 10, i7-3820CPU @ 3.6 GHz, GTX 1070, 16 GB RAM
Hardware: Saitek Cessna yoke and throttle quadrant, Saitek rudder pedals
Addons: Active Sky; FSUIPC (only for Lua, not used for axes and button assignments); Navigraph FMS data

User avatar
doodlebug
Posts: 2134
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: P3DV4.5 HF2 4.5.13.32097

Post by doodlebug » Sun Oct 27, 2019 3:28 pm

Do you have the latest wx? It is available from the support forum.
If you have the wx selected and it hasn't been updated, it will cause a crash.
Oisin Little a.k.a. Osh
Milviz QA/Product Manager

Email is the best way to contact me: info@milviz.com

FSX:SE P3Dv4.5 XP11 Z270X i7-7700 16GB DDR4 GTX1070 Ti Win10 OSX 12.6
ORBx scenery REX environment Chaseplane
P3Dv4.5 HM175 i5-7300HQ 16GB DDR4 GTX1060M Win10

qqwertzde
Posts: 57
Joined: Sat Oct 17, 2015 2:18 pm
Re: P3DV4.5 HF2 4.5.13.32097

Post by qqwertzde » Sun Oct 27, 2019 4:03 pm

Hello Oisin,

I ran the wx update, but it said there was no update available. In addition, I disabled wx in the Otter configuration and used the default gauges instead of the NavStax radio panel that I usually have installed. Even after a full new installation with all these changes, P3D crashes.

Thanks for your reply,
Peter
System: P3D 4.5 HF2, Windows 10, i7-3820CPU @ 3.6 GHz, GTX 1070, 16 GB RAM
Hardware: Saitek Cessna yoke and throttle quadrant, Saitek rudder pedals
Addons: Active Sky; FSUIPC (only for Lua, not used for axes and button assignments); Navigraph FMS data

qqwertzde
Posts: 57
Joined: Sat Oct 17, 2015 2:18 pm
Re: P3DV4.5 HF2 4.5.13.32097

Post by qqwertzde » Sat Nov 02, 2019 7:27 am

I have tried to narrow it down, but no success. It appears the Turbo Otter is not compatible with P3D 4.5 HF2, at least not on my system. Here is what I have done so far:

- fresh reinstall of the Turbo Otter
- uninstalled Wx Advantage Radar
- uninstalled NavStax KingNav radio stack
- Tested a number of different airplanes (Default F 35, Milviz Huey, Aerosoft A320, DC-8, Majestic Dash 8, even the old Flight 1 BN-2 Islander). All other airplanes work just fine

In all tests, I use the default P3D flight (F 35 at airbase at the Gulf of Mexico) and either load the plane directly on the welcome screen, or change the airplane after the flight has loaded. The only thing remaining that I can think of is Reallight. I did not install it when I reinstalled the Turbo Otter, but that didn't help. I have read that other developers do not use Reallight anymore due to problems with HF2. How can I disable Reallight in the DHC-3?

Update: I found the TFDi RealLight Update on https://milviz.com/flight/ and followed the instructions. It didn't help. Gave up on the airplane and uninstalled it :cry:

Here is the Windows Eventviewer log:

Faulting application name: Prepar3D.exe, version: 4.5.13.32097, time stamp: 0x5d8abf93
Faulting module name: KERNELBASE.dll, version: 10.0.17763.802, time stamp: 0x86aa4cf5
Exception code: 0xc0020001
Fault offset: 0x0000000000039129
Faulting process id: 0x2280
Faulting application start time: 0x01d5914ba5c4d248
Faulting application path: D:\P3D4\Prepar3D.exe
Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll
Report Id: 97e06758-97a5-42b1-b71b-0bf46d270917
Faulting package full name:
Faulting package-relative application ID:
System: P3D 4.5 HF2, Windows 10, i7-3820CPU @ 3.6 GHz, GTX 1070, 16 GB RAM
Hardware: Saitek Cessna yoke and throttle quadrant, Saitek rudder pedals
Addons: Active Sky; FSUIPC (only for Lua, not used for axes and button assignments); Navigraph FMS data

User avatar
doodlebug
Posts: 2134
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: P3DV4.5 HF2 4.5.13.32097

Post by doodlebug » Sat Nov 02, 2019 2:52 pm

Please post this in the Turbo Otter support forum.
Oisin Little a.k.a. Osh
Milviz QA/Product Manager

Email is the best way to contact me: info@milviz.com

FSX:SE P3Dv4.5 XP11 Z270X i7-7700 16GB DDR4 GTX1070 Ti Win10 OSX 12.6
ORBx scenery REX environment Chaseplane
P3Dv4.5 HM175 i5-7300HQ 16GB DDR4 GTX1060M Win10


Post Reply