Blackbird Sims / Milviz Forum Archive

E model patch worked for me. J and S model latest patch installed and the aircraft crashes the sim when I try to load a flight with it.

Faulting application name: Prepar3D.exe, version: 3.4.22.19868, time stamp: 0x588f7cbf
Faulting module name: MSVCR90.dll, version: 9.0.30729.9247, time stamp: 0x56fa38aa
Exception code: 0xc0000417
Fault offset: 0x00031484
Faulting process id: 0x2c88
Faulting application start time: 0x01d2ae76212dcff6
Faulting application path: E:\P3D\Prepar3D.exe
Faulting module path: C:\Windows\WinSxS\x86_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.9247_none_5090cb78bcba4a35\MSVCR90.dll
Report Id: 18b9ac0a-8a35-423c-8b34-058068e0dab2
Faulting package full name:
Faulting package-relative application ID:

Just got access to the support forums.

I've got the same issues. When selecting the J/S Phantom, the sim crashes. Started with 1.161120 and updated to 1.170323
Followed the UAC disable and AV procedures.

Removed the jet and everything is fine

Faulting application name: Prepar3D.exe, version: 3.4.22.19868, time stamp: 0x588f7cbf
Faulting module name: ntdll.dll, version: 10.0.14393.479, time stamp: 0x58256ca0
Exception code: 0xc0000374
Fault offset: 0x000d9d11
Faulting process id: 0x1da8
Faulting application start time: 0x01d2ae7d11b1e67c
Faulting application path: E:\Lockheed Martin\Prepar3D v3\Prepar3D.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report Id: 0e3c403f-a27b-4b7a-b906-a80943afc944
Faulting package full name:
Faulting package-relative application ID:

Thanks,
Jeff

Go to your MVAMS directory\Configruations\F4J and F4S and F4E and delete all mlvz files.

It's probably a stupid question but where can i find the vA1.170323 Update installer for the F-4E ?

I purchased it yesterday -from your website- and P3D crash to desktop a few seconds after it loaded the Phantom. the installer version i have is 1.161120.

JonathanBleeker wrote:Go to your MVAMS directory\Configruations\F4J and F4S and F4E and delete all mlvz files.

Before or after installing/reinstalling?

delete then open MVAMS. The files will be recreated

SergeyevK wrote:It's probably a stupid question but where can i find the vA1.170323 Update installer for the F-4E ?

I purchased it yesterday -from your website- and P3D crash to desktop a few seconds after it loaded the Phantom. the installer version i have is 1.161120.

Is there someone who can help me get that 1.170323 update?

Hi Fabrice,

ooops - unfortunately, you slipped though the crack between the patch being sent out and the release of new installer (which is imminent); but now you have mail!

Cheers - Osh

Working perfectly now Osh. Thank you.

Mine is still crashing to desktop.

Went back and removed everything and started from the 1.161120 F-4E and installed as admin per your instructions. I didnt have a MVAMS from previous, but a new one popped up after install. Set everything and saved.
Then installed the F-4E TacPack addon 1.161120 using the same procedures.

I did not patch to the latest 1.170323 since I didnt see anything for TP mentioned.

Went through cold and dark and began the engine start. As soon as the engine began spooling up, the sim stopped and CTD.

Faulting application name: Prepar3D.exe, version: 3.4.22.19868, time stamp: 0x588f7cbf
Faulting module name: facilities.dll, version: 3.4.22.19868, time stamp: 0x588f7c49
Exception code: 0xc0000005
Fault offset: 0x0001c7c5
Faulting process id: 0x210c
Faulting application start time: 0x01d2b71f5fedda7e
Faulting application path: E:\Lockheed Martin\Prepar3D v3\Prepar3D.exe
Faulting module path: E:\Lockheed Martin\Prepar3D v3\facilities.dll
Report Id: 7dc03abb-083e-40df-a58b-1a830d53e94a
Faulting package full name:
Faulting package-relative application ID:

YOu must be running the latest P3D or you will get a CTD.

Krazycolin wrote:YOu must be running the latest P3D or you will get a CTD.

According to P3D's website and my license agreement, 3.4.22.19868, is the latest, which I'm running.

According to JonathanBleeker he found an issue that needs to be fixed.

viewtopic.php?f=101&t=7302&start=10

Bill Clark

Bingo041 wrote:According to JonathanBleeker he found an issue that needs to be fixed.

viewtopic.php?f=101&t=7302&start=10

Bill Clark

Thanks Bill.

Hi, Osh told me to post to Jonathan.

I got an email notification yesterday (25 April 2017) that the F-4 I bought was updated so I downloaded it and installed it.

However, when I ran P3D and loaded the F-4 within 20 seconds I get a CTD, no matter where in the world I am. If I load it fresh or load it after the default plane, always a CTD.

So I uninstalled it and installed the last version and now it works so I wonder what's wrong?

P3D 3.4.18.19475. And please don't tell me I have to go with the latest hot fix from LM because I won't do it, it breaks some Orbx stuff.

I run it on Window 7/64.
No Defender or A/V at all, ever. I only use this PC for P3D.
Plus I always run everything as Admin.