KA350i Version 1.1 (SP1) GM (1.1.3) [withdrawn]

[Turbofandude]

Hello all,

Version 1.1.3 (the GM of the "1.1" SP1 update) is now available here: [withdrawn due to a few last-minute issues]
We are testing a new version and will update this post when it is available.

Please FULLY uninstall the previous version of the aircraft before installing this one.

This version is the final version of the update. There will be no further changes unless there are any reproducible CTDs that somehow hid from the beta and development team. We intend to release it formally to all customers in the next few days but we are giving support forum users a first look at it (this helps us ensure that no issues appear with a much wider audience and it gets you all the new version for the weekend). I have done my best to summarize changes from the last release below. There are likely many more changes that I did not list.

Changes from 1.0.1 (Dec 23, 2019)
FMS Changes
-Fixed cycle dates showing yellow at all times
-Fixed broken "NEW HOLD" LSK
-Fixed reverse wind entry
-Fixed issue with entering small negative coordinates
-Fixed typos/display inaccuracies on the ARRIVAL DATA page
-Fixed broken duplicate waypoint selection on PERF TRIP page
-Fixed incorrect elevation display on ARRIVAL DATA page
-Fixed incorrect default hold data
-Fixed airport position initialization not entering departure airport
-Added RX## waypoint system for VECTOR approaches
-Fixed overly restrictive filtering behavior
-Fixed incorrect departure/arrival/approach filtering
-Fixed broken SEC FPLN ROUTE MENU link
-Fixed SEC FPLN page change behavior
-Fixed labeling of SEC FPLN DEPART/ARRIVE pages
-Fixed ability to select transitions when not displayed
-Corrected "NBDs" typo
-Fixed procedure name designations
-Corrected (as much as possible) the behavior of the "RWY" text on the legs page
-Fixed localizer data not showing all runways
-Fixed inability to use LSK-copy method to copy waypoints further down the flight plan
-Changed default HOLD speed
-Added ability to display TEARDROP and PARALLEL HOLD entry type
-Fixed erroneous "CANCEL HOLD" display
-Fixed page indexing issue with departure runway selection
-Fixed FIX INFO drawing
-Added FIX INFO intercept calculation (first pass, WIP)
-Fixed incorrect duplicate leg detection
-Fixed incorrect leg sequencing when adjusting a SID/STAR
-Made DIR TO after auto sequence inhibit revert to auto sequence
-Fixed unintentional modification/data updating of active legs from the DIRECT TO history
-Moved ini locations for better re-usability
-Moved pilot route location for better re-usability
-Added Navigraph chart viewer system
-Improved FIX INFO entry and display
-Fixed inabilty to enter VERTICAL DIR TO altitude via scratchpad
-Made editing TO leg directly perform DIR TO
-Improved display of DIR TO vertical fields
-Improved restriction of DIR TO vertical entry
-Fixed inability to reselect an approach after passing the missed approach point
-Discontinuities are no longer inserted after the departure for empty flight plans
-Made an internal change to prevent multiple DIRECT TO objects from being created
-Fixed an issue incorrect reselection of the FROM LEG when changing a STAR/APPR
-Fixed font size on DEP/ARR pages
-Fixed clicking DEP/ARR from the ARRIVAL page not returning to DEP/ARR INDEX
-Various other fixes
-Fixed leg text copying on FPLN page
-Fixed a CTD related to certain leg entry
-Switched flyover handling internally to prevent unneeded @ display
-Fixed hold exit prompt text
-Made modifying leg flyover behavior cause a flight plan modification
-Fixed name of certain HOLDs
-Fixed ability to improperly copy current position before entry
-Fixed an issue potentially incorrectly deleting legs
-Fixed incorrect leg wind entry index
-Allowed copying of leg wind data
-Made HOLD portion of missed approach remain when new approach is selected
-Fixed missing designation for certain approaches
-Fixed certain FIX behavior
-Fixed VA/CA overfly
-Going DIR to a non-flightplan waypoint during a HOLD now advances the hold behind the (DIR) object
-Made airport/runway DIR TO use proper DIR TO system
-Made insert/non-FPLN DIR TO within MAP portion of FPLN erase subsequent map legs
-Improved selection/resetting of ILS data
-Fixed re-selection of STAR/APPR from leg control after completing MAP
-Fixed detection of waypoint chains for dissimilar object types
-Fixed incorrect double-insertion of holds under certain conditions
-Fixed incorrect DIR INTC CRS entry behavior
-Fixed SP RNG number accuracy
-Fixed inability to enter VNAV DESCENT TGT SPEED
-Fixed TRANS ALT display on VNAV CLIMB page
-Fixed TRANS FL display on VNAV DESCENT page
-Fixed inability to enter C/F on TEMP COMP page
-Fixed inability to delete marked points
-Fixed inability to edit second marked point description on each page
-Fixed wrong line select copying marked point latitude/longitude
-Various leg/calculation fixes
-Added automatic setting of vertical usage based on surrounding waypoints (closing gaps)
-Added additional parameters to the runway leg for visual approaches
-Fixed hard-coded "SGF" text on FIX page
-Fixed FROM leg EFOB updating
-Fixed EFOB calculation issue
-Fixed inability to enter ISA DEV properly on LEG WIND page
-Allowed copying of leg ISA deviation

Systems Changes
-Corrected ATC ID of liveries
-VCP improvements
-Removed invalid panel.cfg entry
-Removed invalid aircraft.cfg light entries
-Removed "repair" and "modify" installer options to prevent unintentional de-activation
-Made fuel/payload stay as-is when startup scenario is set to current conditions
-Added check box to enable/disable hardware mapping
-Missing panel bitmap added

PL21 Changes
-Fixed a possible CTD relating to changing flight plans
-TAWS No longer causes erroneous alerts on load
-Fixed display of charts when CHARTS menu was re-opened
-Doubled resolution of PFD and MFD for better readability
-Allowed zoom, pan, and rotation of charts
-Added moving airplane symbol to charts display for geolocated charts
-Added procedure turn arrow display
-Updated size of flight plan arrow
-Made arrow not appear at incorrect times
-Fixed screens not clearing and redrawing fully
-Fixed drawing of runways for visual approaches
-Fixed FIX display behavior
-Fixed several crashes related to leg indexing
-Fixed RTU/FMS transponder syncing
-Fixed a PLAN related CTD
-Fixed missing RESERVE fuel display on MFD PROG

Visual Changes
-Fixed fire extinguisher indicated level
-Fixed missing texture
-Fixed reversed EMER FREQ
-Fixed the GND COMM and EMERG FREQ buttons
-Fixed reversed animation of right aileron trim movement
-Fixed cabin-side cabin door lighting
-Added wing views

In addition to the list above, significant improvements have been made to the following areas:

• Leg sequencing
• Leg location/prediction calculations
• VNAV
• LNAV
• DIR TO and leg insertion behavior
• Overall systems accuracy
• Overall model accuracy
• Overall texture accuracy
• Overall night lighting accuracy

[xender]

Thanks! Testing it as we speak.

All the bugs i had are nowhere to be found now

[drobs2001]

Thanks guys for the hard work! Looking forward to fly it.

[lukasz]

A
L
L
works
P
E
R
F
E
C
T
Thank You!

[matpietsch]

Quick question: How to activate the navigraph chart viewer?

[qqwertzde]

Testing it right now. Thank you so much for publishing this on Good Friday. That's really awesome of you

Peter

[lukasz]

Quick question: How to activate the navigraph chart viewer?

On FMC
1. STAT then CHART SUBSCRIPTION
2. (opening browser) - confirm navigraph subscr
3. Back to sim And use and enjoy Charts...

[jarek]

It was not easy, but everything that could fit the Easter schedule is there. Hope you will enjoy this one guys.

Just landed in Rzeszow EPRZ after 5hr flight from capital of Georgia - Tbilisi UGTB.

FH.PNG (848.16 KiB) Viewed 1693 times

[Matthieu-C]

Quick question: How to activate the navigraph chart viewer?

On FMC
1. STAT then CHART SUBSCRIPTION
2. (opening browser) - confirm navigraph subscr
3. Back to sim And use and enjoy Charts...

Hi,
Thanks for the explanation but it does not work on my computer: SUBSCRIPTION NUMBER MANUAL or SUBSCRIPTION ERROR and nothing happens (no opening browser). Any idea?

[matpietsch]

Same on my end.

[michaelth]

I can neither see my stored routes in the route menu, nor can I store a new route.

Michael

[alex.767]

Can this be uploaded somewhere else? Getting an atrocious download speed.

[chevelle505]

has anyone else noticed a major frame rate hit on this version compared to the original? Just to confirm, i uninstalled this and re installed the origional version then went back to 1.1.3 and this thing is tanking my system...un flyable. The origional in fairly dense scenery im seeing 19-21fps. With this version im getting 6.5-7.5 in the same scenery and in the middle of nowhere im only hitting 10-11 fps. what was changed that could cause this? I havent changed a single thing on my entire system since logging around 25 hours with the origional version...everything was fine..i install this version and its like a slide show. textures maybe??? I hope this is curable...waited months for this day and now the plane is un usable for me

[qqwertzde]

-Made fuel/payload stay as-is when startup scenario is set to current conditions

I am wondering if the "current conditions" status has been fixed. I just tried and always have the engines running and landing lights on, even though I shut the airplane down completely before exiting the simulator.

Thanks,
Peter

[Turbofandude]

Please try disabling transparent rendering via the MVAMS if you're getting very low FPS. Regarding charts, that's unusual. Do you have any Navigraph charts ini files in your P3D\Milviz folder?