New User Questions [popup windows]

Locked
Radial9
Posts: 5
Joined: Sun Oct 29, 2017 10:03 am
New User Questions [popup windows]

Post by Radial9 » Sun Oct 29, 2017 1:36 pm

Enjoying the AC! Two questions have come up as I configure and do pattern work to "get a feel" for my new Beaver.

One: How do I undock and move the Garmin over to my second monitor? I find no click spots, no Shift 1,2,3 and no mention of the issue in both manuals.

Two: I'm fairly proficient with FSUIPC. The prop WILL NOT assign to my CH THQ. The throttle and Mixture work fine. I have tried most every combination and checked all my settings. It simply will not assign. It should. It calibrates. Any thoughts?

I am noticing some oddity in the flight dynamics. She bounces around like a feather in the breeze with no wind rather than a 5,000 pound fuselage being forced to move through thrust. Might need to "dicker" with more flight settings.

Liking what I'm seeing so far, but at 62 with poor eyesight PLEASE tell me I can undock the COMS/NAV and/or GPS over to my second monitor.

Cheers!

N4GIX
Posts: 1023
Joined: Mon Sep 06, 2010 3:47 pm
Re: New User Questions

Post by N4GIX » Sun Oct 29, 2017 5:11 pm

Since I had no involvement with this project, I can only answer your question regarding the lack of a popup window for the GPS. There isn't one...

Chuck Jodry
Posts: 442
Joined: Mon Dec 20, 2010 4:30 pm
Re: New User Questions

Post by Chuck Jodry » Sun Oct 29, 2017 7:06 pm

Hello , Thank You for having purchased the DHC2 , I wasn't sure what panel setup you were using but if you add the following lines to the panel.cfg you can add a popup window with the MV set of GNS systems.

We are planning to do this in an update as there have been a few requests to enable the option , we had been getting away from having 2D cockpits but admittedly dialing in the data is easier for us old boys with glasses on the popup versions.

Whatever the next window number available is what you should number it , IE if the last existing is 3 [Window03] make the GNS Window04=GNS and [Window04] .

Ill check back to see how you made out , if you need assistance let me know what panel you are running and I can set it up for you .

PS Try assigning the throttle quadrant position lever to prop1

Best CJ


Window01=GPS

[Window01]
Background_color=0,0,0
size_mm=1280,650
window_size_ratio=1.000
position=2
visible=0
ident=225
window_size= 0.710, 0.552
window_pos= 0.290, 0.480

gauge00=C310_XMLGauges!FBS_GNS430_2d, 640,0,640,268
gauge01=C310_XMLGauges!KR 87 ADF, 640,268,640,134
gauge02=C310_XMLGauges!FBS_GNS530_1d, 0,0,640,468
gauge03=C310_XMLGauges!FBS_KAP140, 640,402,640,163
gauge04=C310_XMLGauges!FBS_GTX330, 0,468,640,170


//--------------------------------------------------------
Last edited by Chuck Jodry on Sun Oct 29, 2017 7:21 pm, edited 1 time in total.

N4GIX
Posts: 1023
Joined: Mon Sep 06, 2010 3:47 pm
Re: New User Questions

Post by N4GIX » Sun Oct 29, 2017 7:19 pm

By the way, there is a mouse point on the screen of the GNS530 that should toggle the popup if the ident code in the window definition is set to 225 instead of GPS_Panel:

ident=225

In any event, Shift-2 will open/close the popup window.

Radial9
Posts: 5
Joined: Sun Oct 29, 2017 10:03 am
Re: New User Questions

Post by Radial9 » Mon Oct 30, 2017 8:50 pm

It's a no go. Here is what mu P3Dv4 Beaver panel.cfg looks like after the edit.

After change Shift 2 brings up Bendix WX gauge.

Where on the GNS is the click spot?

Cheers,




// This Panel.cfg file created by FS Panel Studio panel editor utility - http://www.fspanelstudio.com
// Built Monday, September 28, 2015 at 18:03 FSPS Build:22900

[Window Titles]
Window00=Main Panel

[VIEWS]
VIEW_FORWARD_DIR=8.000, 0.000, 0.000



//--------------------------------------------------------
[Window00]
BACKGROUND_COLOR=0,0,0
size_mm=208,129
position=8
visible=0
ident=MAIN_PANEL

[Window01]
Background_color=0,0,0
size_mm=1280,650
window_size_ratio=1.000
position=2
visible=0
ident=225
window_size= 0.710, 0.552
window_pos= 0.290, 0.480

gauge00=C310_XMLGauges!FBS_GNS430_2d, 640,0,640,268
gauge01=C310_XMLGauges!KR 87 ADF, 640,268,640,134
gauge02=C310_XMLGauges!FBS_GNS530_1d, 0,0,640,468
gauge03=C310_XMLGauges!FBS_KAP140, 640,402,640,163
gauge04=C310_XMLGauges!FBS_GTX330, 0,468,640,170


gauge00=


//--------------------------------------------------------

N4GIX
Posts: 1023
Joined: Mon Sep 06, 2010 3:47 pm
Re: New User Questions

Post by N4GIX » Tue Oct 31, 2017 3:18 pm

Radial9 wrote: [Window Titles]
Window00=Main Panel
You didn't add this entry:

[Window Titles]
Window00=Main Panel
Window01=GPS

The click spot should be on the screen, but I noticed that for some reason it's not working. Shift-2 however does work. Once opened, clicking on the popups GNS530 screen will close the popup.

Radial9
Posts: 5
Joined: Sun Oct 29, 2017 10:03 am
Re: New User Questions

Post by Radial9 » Tue Oct 31, 2017 6:33 pm

Still a no go. Shift 2 brings up WX Radar window. This is what my panel.cfg looks like now. Of note, there are 4 Beaver folders in my P3Dv4 simobjects folder. I am opening the one named DCH-2 Beaver Milviz. I am then opening the folder named panel. I am then opening panel.cfg.

BTW, assigning prop to second throttle lever on CH THQ worked. Thank you!



// This Panel.cfg file created by FS Panel Studio panel editor utility - http://www.fspanelstudio.com
// Built Monday, September 28, 2015 at 18:03 FSPS Build:22900

[Window Titles]
Window00=Main Panel
Window01=GPS

[VIEWS]
VIEW_FORWARD_DIR=8.000, 0.000, 0.000

//--------------------------------------------------------
[Window00]
BACKGROUND_COLOR=0,0,0
size_mm=208,129
position=8
visible=0
ident=MAIN_PANEL

[Window01]
Background_color=0,0,0
size_mm=1280,650
window_size_ratio=1.000
position=2
visible=0
ident=225
window_size= 0.710, 0.552
window_pos= 0.290, 0.480

gauge00=C310_XMLGauges!FBS_GNS430_2d, 640,0,640,268
gauge01=C310_XMLGauges!KR 87 ADF, 640,268,640,134
gauge02=C310_XMLGauges!FBS_GNS530_1d, 0,0,640,468
gauge03=C310_XMLGauges!FBS_KAP140, 640,402,640,163
gauge04=C310_XMLGauges!FBS_GTX330, 0,468,640,170


//--------------------------------------------------------


[Vcockpit01]

Chuck Jodry
Posts: 442
Joined: Mon Dec 20, 2010 4:30 pm
Re: New User Questions

Post by Chuck Jodry » Wed Nov 01, 2017 3:06 pm

Can you attach a zip with the aircraft.cfg and your panel.cfg from the panel folder listed in panel= from that aircraft.cfg please .

Thanks

Best CJ

Radial9
Posts: 5
Joined: Sun Oct 29, 2017 10:03 am
Re: New User Questions [popup windows]

Post by Radial9 » Thu Nov 02, 2017 8:28 pm

Hi Chuck,

Hopefully this is what you are looking for.

Cheers!
Attachments
beaver panel.zip
(7.74 KiB) Downloaded 57 times

Chuck Jodry
Posts: 442
Joined: Mon Dec 20, 2010 4:30 pm
Re: New User Questions [popup windows]

Post by Chuck Jodry » Sat Nov 04, 2017 3:34 pm

Hello , I did the modifications to the panel.cfg for P3Dv4 specifically , shift 2 will pop up the units

Best CJ
Attachments
MV-GNS-P3DV4-panel.zip
(1.12 KiB) Downloaded 31 times

Radial9
Posts: 5
Joined: Sun Oct 29, 2017 10:03 am
Re: New User Questions [popup windows]

Post by Radial9 » Mon Nov 06, 2017 7:13 pm

CJ,

Let's make sure I'm following the correct procedure for placing the file you attached. I believe your making an assumption that I am more "versed" in panel placement, config files and general panel operations that what reality is.

I took the file you provided, I changed it's name to just "panel". I then went to my P3D Simobjects/Airplanes/DHC-2 Beaver Milviv folder. I renamed the existing panel.cfg file to panel_old_orig.cfg. I then placed the new file you provided into the panel folder in the location already referenced.

I rebooted, restarted P3D and under the MilViz publisher aircraft chose DHC2 Beaver N5347G. I open the aircraft. It immediately stalls. Every time I open it. I restart the engines using Ctrl-E.

The GPS unit is showing embedded into the firewall tucked in against the throttle/prop/mixture casing right where it was intended to be.

I perform a Shift-2.

What I get is what I have gotten since the beginning of this exercise, the Bendix WX panel.

Perhaps I am doing something not in the proper way or sequence here??

New higher end system, P3D4.1, 4K monitor, 27" 1920x1080 second monitor.

All other 2D AC panels pop up and move over just fine.

Cheers,


Locked

Return to “DHC-2 Beaver Support Forum”