Unable to disengage parking brake

bugdani
Posts: 33
Joined: Mon Sep 26, 2011 9:42 pm
Location: Liège, Belgium
Contact:
Unable to disengage parking brake

Post by bugdani » Tue Dec 26, 2017 7:25 pm

Problems are back with the extension pack for the Beaver.
Totally unable to disengage the parking brake
I'm with P3dv4.1 and any advise is strongly welcome!
The only way to use this plane is F4 in slew mode then release the slew.... not very realist, isn't it?

Dani.

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: Unable to disengage parking brake

Post by doodlebug » Fri Dec 29, 2017 1:09 pm

Hi Dani,
Can you see the parking brake handle in the cockpit move?
Is this the only strange behaviour?

bugdani
Posts: 33
Joined: Mon Sep 26, 2011 9:42 pm
Location: Liège, Belgium
Contact:
Re: Unable to disengage parking brake

Post by bugdani » Fri Dec 29, 2017 9:15 pm

Yes I can see it moving a bit and the plane seems to move slightly too but she stay on place.
The most strange thing is that the speed increase and finally I'm able to T/O....... but on place !!!!!
I can fly, turn climb and even descend BUT ON PLACE! The plane doen't move in the landscape !
I even can see the wheels turning but I stay over the runway

But since today, the brakes have released three times ! Maybe.....

Dani.

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: Unable to disengage parking brake

Post by doodlebug » Fri Dec 29, 2017 10:49 pm

Did you remove the chocks?

bugdani
Posts: 33
Joined: Mon Sep 26, 2011 9:42 pm
Location: Liège, Belgium
Contact:
Re: Unable to disengage parking brake

Post by bugdani » Sun Dec 31, 2017 2:49 pm

Yes ,of course, I did !

bugdani
Posts: 33
Joined: Mon Sep 26, 2011 9:42 pm
Location: Liège, Belgium
Contact:
Re: Unable to disengage parking brake

Post by bugdani » Fri Jan 05, 2018 1:29 pm

A very strange observation:

There is a single texture (AEROTAXI downloaded) without the parking brake problem !!! :o
All the other DHC2 are not available normaly.
I don't understand what happen!

Chuck Jodry
Posts: 442
Joined: Mon Dec 20, 2010 4:30 pm
Re: Unable to disengage parking brake

Post by Chuck Jodry » Fri Jan 05, 2018 2:24 pm

The problem is unique and isolated to your computer , with the last comment on one paint version working I suspect there is corruption of the installed files , a controller assignment or automation addon in effect such as accusim .

The first thing I would suggest is backing up the Aircraft.cfg and installing the latest version again , Do Not Uninstall so the additional paint folders remain intact .

Disable Accusim if used .

Run the base aircraft without any modifications whatsoever and assess the Parking Brake . If its working normally there and not the expansion pack there is some corruption of the CFG or its related to Accusim .

Best CJ

bugdani
Posts: 33
Joined: Mon Sep 26, 2011 9:42 pm
Location: Liège, Belgium
Contact:
Re: Unable to disengage parking brake

Post by bugdani » Mon Jan 08, 2018 10:42 am

Thank you for answering,

sorry but I'm not sure how to proceed to disable Accusim :?
Indeed, I own several products of A2A so....

Dani.

JonathanBleeker
Posts: 3446
Joined: Sat Mar 13, 2010 7:38 pm
Re: Unable to disengage parking brake

Post by JonathanBleeker » Mon Jan 08, 2018 11:02 am

Accufeel, not Accusim. Should be able to disable it from the Addons menu.

bugdani
Posts: 33
Joined: Mon Sep 26, 2011 9:42 pm
Location: Liège, Belgium
Contact:
Re: Unable to disengage parking brake

Post by bugdani » Wed Jan 10, 2018 4:54 pm

There is not Accufeel in/for P3D v4.1, so I haven't it.

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: Unable to disengage parking brake

Post by doodlebug » Wed Jan 10, 2018 5:21 pm

Chuck Jodry wrote:The first thing I would suggest is backing up the Aircraft.cfg and installing the latest version again , Do Not Uninstall so the additional paint folders remain intact .

Disable Accusim if used .

Run the base aircraft without any modifications whatsoever and assess the Parking Brake . If its working normally there and not the expansion pack there is some corruption of the CFG or its related to Accusim .


Can you confirm that you have followed Chuck's first suggestion of reinstalling and checking with the base aircraft?

bugdani
Posts: 33
Joined: Mon Sep 26, 2011 9:42 pm
Location: Liège, Belgium
Contact:
Re: Unable to disengage parking brake

Post by bugdani » Thu Jan 11, 2018 7:30 pm

Yes ! Several times, but it's always the same problem !

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: Unable to disengage parking brake

Post by doodlebug » Thu Jan 11, 2018 8:28 pm

Since it seems to be particular to your set up, could you list your other addons, extensions, hardware, etc, so we can try to work out which one is potentially causing the problem.

Please add the list to your forum signature to expedite future support - thanks - Osh

bugdani
Posts: 33
Joined: Mon Sep 26, 2011 9:42 pm
Location: Liège, Belgium
Contact:
Re: Unable to disengage parking brake

Post by bugdani » Tue Jan 16, 2018 6:21 pm

Hello,

I have an I7 2600k with a 1080GTX, CH product yoke and pedals.
Addons is mainly ORBX, 29palms, turbulent sceneries, with some A2A planes, Alabeo, carenado and Milviz Talon, F4, P38 planes, Some Cera choppers.
REX4 and Soft clouds + PTA all in P3D4.1 environement.
All is working well but Dhc2 beaver doesn't
Only two problems with this bird:
- no working radar
- Unable "to release parking brake" as explained above... the stay on place like a kite even with indicated speed increasing and able to T/O and fly..... but on place ( even the wheels are turning !!! )

Chuck Jodry
Posts: 442
Joined: Mon Dec 20, 2010 4:30 pm
Re: Unable to disengage parking brake

Post by Chuck Jodry » Tue Jan 16, 2018 7:10 pm

I cant say where the problem lies , pedals , software or gauges but a solution follows

You can turn the pb off in the aircraft.cfg by pasting the following in where parking_brake=0 replaces parking_brake=1

[brakes]
toe_brakes_scale=0.5
parking_brake=0
differential_braking_scale = 0.5

Best CJ
Last edited by Chuck Jodry on Tue Jan 16, 2018 8:51 pm, edited 1 time in total.


Locked

Return to “DHC-2 Beaver Support Forum”