Cannot create dll.xml-floder not found
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: Cannot create dll.xml-floder not found
Hello , As a test please reinstall Just the PC6 Osh can help if activations need resetting , let us know if its functioning normally , If it is then look at the Cessna in game and see if it is Systems Nominal , should that be the case we need examine the installer for the C410 .
Best CJ
Best CJ
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: Cannot create dll.xml-floder not found
Just tried re-installing the last updated version; I saw a repair option and I took that. After completion I got the screen showing I need repeat authorization.
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: Cannot create dll.xml-floder not found
Sounds like it installed , I was contacting Osh to reset activations for you , in the meantime try to load the Cessna , if that version of XMLtools does load properly then we have our answer in any case
Will await results
Best CJ
Will await results
Best CJ
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: Cannot create dll.xml-floder not found
Well, before I tried the 310r again, I tried to reinstall the Porter again since I declined the xmltool option with the last attempt. This time, I clicked OK for the xmltools installation and the (repair) installation completed normally indicating the folders were found and installation was successful.
Still waiting for the activation update to test fly it.
In the meantime, I tried reinstalling the 310r again, but when I clicked OK to the xmltools installation, I got the same file not found statement. Selecting the 310r in p3d leads to p3d closing without comment.
Something in the 310r installer?
Still waiting for the activation update to test fly it.
In the meantime, I tried reinstalling the 310r again, but when I clicked OK to the xmltools installation, I got the same file not found statement. Selecting the 310r in p3d leads to p3d closing without comment.
Something in the 310r installer?
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: Cannot create dll.xml-floder not found
The activation was reset for the PC6 , you may have to reinstall the PC6 again as the idea was to install only that version of the XMLtools installer . Please try to do just that , Run PC6 installer , then verify In Game weather the Cessna works too , the XLM tools operating system back end is going to function In theory with the PC6 one installed .
That will determine If the one designated in the Cessna Installer is defective ( as it appears ) do not reinstall the Cessna if my hunch is right it should run too using the PC6's xmltools .
Best CJ
That will determine If the one designated in the Cessna Installer is defective ( as it appears ) do not reinstall the Cessna if my hunch is right it should run too using the PC6's xmltools .
Best CJ
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: Cannot create dll.xml-floder not found
PC6 launch failed; activations at their limit.
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: Cannot create dll.xml-floder not found
And selecting the 310 in game still closes p3d after scenery loads
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: Cannot create dll.xml-floder not found
I am told its been reset . the result is disappointing as that means something in windows permissions and folder ownership may be at fault and they are not easy to diagnose , were you updating your OS recently , migrating disks or any major change ? what was the reason you had to reinstall these ?
Best CJ
Best CJ
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: Cannot create dll.xml-floder not found
"Your activation is invalid or has reached its limit. Please contact support", just now
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: Cannot create dll.xml-floder not found
You should have heard from support , is that activation issue resolved , Were you updating your OS recently , migrating disks or any major change ? what was the reason you had to reinstall these ?
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: Cannot create dll.xml-floder not found
Got the reset key from Osh; here's my reply:
Hey Osh, thanks for getting involved.
After deleting the PC6 in control panel, I re-installed the PC6 and this time I got the registration box, added the key and loaded the plane which now had fully functioning engine instruments and throttle. A quick look appears to show normal function.
However, after reinstalling the 310r (after removing) the same thing happens, p3d shuts down. Curiously, when re-installing the 310 I never get the registration/key box.
So, PC6 seems OK; still can't get the 310r to load.
Hey Osh, thanks for getting involved.
After deleting the PC6 in control panel, I re-installed the PC6 and this time I got the registration box, added the key and loaded the plane which now had fully functioning engine instruments and throttle. A quick look appears to show normal function.
However, after reinstalling the 310r (after removing) the same thing happens, p3d shuts down. Curiously, when re-installing the 310 I never get the registration/key box.
So, PC6 seems OK; still can't get the 310r to load.
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: Cannot create dll.xml-floder not found
For the sake of all possible elements being done please run the MVAMS , Select the MVC310 and in the Radio options select the default panel with GNS 430 530 and NO weather radar .
If that works out good stuff , its down to WX being incompat with version if not , greater minds will need to prevail upon the little grey cells with the question WTF IzIt ?
You have not answered this question twice > Were you updating your OS recently , migrating disks or any major change ? what was the reason you had to reinstall these ?
Best CJ
If that works out good stuff , its down to WX being incompat with version if not , greater minds will need to prevail upon the little grey cells with the question WTF IzIt ?
You have not answered this question twice > Were you updating your OS recently , migrating disks or any major change ? what was the reason you had to reinstall these ?
Best CJ
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: Cannot create dll.xml-floder not found
Sunovabeech, after selecting default radios in mvams, the plane loaded correctly in the selected cold & dark state. Haven't tried to start it yet, but wow, it was good to see just that.
If it is the radar, why'd it work initially?
Almost forgot your questions. The OS upgraded to the notorious 1903 update; only other changes were some scenery's from Latin VFR, but I seem to remember using them afterward in the 310r without difficulty.
Can we blame it on the radar module and what do we do next?
If it is the radar, why'd it work initially?
Almost forgot your questions. The OS upgraded to the notorious 1903 update; only other changes were some scenery's from Latin VFR, but I seem to remember using them afterward in the 310r without difficulty.
Can we blame it on the radar module and what do we do next?
- doodlebug
- Posts: 1642
- Joined: Sun Feb 19, 2017 2:49 pm
- Location: LYX>YUL
Re: Cannot create dll.xml-floder not found
Doh - I should've thought of that.
You probably need to install the WX patch for P3D v4.5 (hotfix)
New WX supporting P3D v4.5 HOTFIX 4.5.12.30293
You probably need to install the WX patch for P3D v4.5 (hotfix)
New WX supporting P3D v4.5 HOTFIX 4.5.12.30293
-
- Posts: 66
- Joined: Sun Sep 19, 2010 3:12 pm
Re: Cannot create dll.xml-floder not found
BTW, at the last install, I didn't run the radar installation that came with the download. Should I try that and go back into mvams and select what I had before (F1750 & radar)?