F-4J\S CTD on engine start - non-funcitonal

Locked
jlknolla
Posts: 14
Joined: Sat Apr 04, 2020 7:01 pm
F-4J\S CTD on engine start - non-funcitonal

Post by jlknolla » Sat Apr 04, 2020 7:28 pm

F-4J\S Advanced CTD on engine start
Post by jlknolla » Sat Apr 04, 2020 7:22 pm

Just purchased F-4J\S Advanced (from Just Flight), installed with A/V paused, Defender ignoring install directory, as Admin - followed the troubleshooting guide but seeing the following:

load mission to different aircraft (cold and dark)

MVAMS set to Cold and Dark

connect GPU, set engine masters to ON and hear immediate airflow noise (almost like engines running)

set Gen to EXT, systems power on and lights work

set GPU to airflow and right engine starts to turn immediately

right click on right throttle at 10% RPM and sim hangs with CTD 5-8 seconds later(although engine spool sounds continue until CTD the RPM stops at 10-11%)

attempted ctrl-e autostart, no start

attempted switch from running aircraft on ground to F-4, engines spun down

attempted to switch from a flying aircraft to F-4, engines spun down and would not light

Running P3DV4.5 V4.5.13.32097
Win10 Home V1903 Build 18362.720
i7 8700K, 32GB DDR, GTX 1070Ti

jlknolla
Posts: 14
Joined: Sat Apr 04, 2020 7:01 pm
Re: F-4J\S CTD on engine start - non-funcitonal

Post by jlknolla » Sat Apr 04, 2020 8:05 pm

Found event viewer log from latest if it helps:

Fault bucket 1412628288068349270, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0

Problem signature:
P1: Prepar3D.exe
P2: 4.5.13.32097
P3: 5d8abf93
P4: KERNELBASE.dll
P5: 10.0.18362.719
P6: b31987d3
P7: c0020001
P8: 000000000003a859
P9:
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3C2C.tmp.dmp
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3E02.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3E12.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3E10.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER3E21.tmp.txt

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_Prepar3D.exe_635c658d276ac9b66b9e768bfbf3675c3b16198_1793b743_8055bf3b-aa6c-4531-b037-a4359606f1fb

Analysis symbol:
Rechecking for solution: 0
Report Id: 5bbed822-cef0-427b-b007-218927b17e43
Report Status: 268566528
Hashed bucket: 5e1b0037cd6b9445d39aa9f18dfb6d56
Cab Guid: 0

Raptor
Posts: 411
Joined: Wed Feb 26, 2014 3:07 am
Re: F-4J\S CTD on engine start - non-funcitonal

Post by Raptor » Sun Apr 05, 2020 1:52 am

Can you verify you installed in this order?

base aircraft > TackPack module > Advanced module

jlknolla
Posts: 14
Joined: Sat Apr 04, 2020 7:01 pm
Re: F-4J\S CTD on engine start - non-funcitonal

Post by jlknolla » Sun Apr 05, 2020 2:22 am

I am not using TacPack so only installed the advanced model - installer only had the 2 options.

jlknolla
Posts: 14
Joined: Sat Apr 04, 2020 7:01 pm
Re: F-4J\S CTD on engine start - non-funcitonal

Post by jlknolla » Sun Apr 05, 2020 2:32 am

OK, that did it, I misread\misunderstood the install instructions, all is well!!

Thanks!


Locked

Return to “McDonnell Douglas F-4 J/S ADVANCED Support Phorum”