PC 6 Steam Edition ne fonctionne pas correctement

jmv.carron
Posts: 19
Joined: Mon Feb 03, 2020 10:36 am
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by jmv.carron » Thu Feb 13, 2020 8:48 pm

Taguilo wrote:
Thu Feb 13, 2020 2:30 pm
Awesome!

For the GPS, which version are you using? Did you turn on Avionics switch?

Tomas
I tried the GNS730 of flight 1 and yes I switched on avionics but nothing.

jmv.carron
Posts: 19
Joined: Mon Feb 03, 2020 10:36 am
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by jmv.carron » Tue Feb 18, 2020 9:18 pm

Up ? I have some news and some questions :
-The needle ball indicator has some issues. The ball does not move at all.
-Where can I get some liveries for the steam edition? (cause all the liveries are for the p3d one)
-I don't really understand how the engine works and really often the engine explode, can you help me?
-How do you use beta range?
And a last question, or just an idea for the devs ;). Is it possible to create a "Garmin 950" version of the plane like the last ones released by pilatus ? (see the cockpit in the picture)
Or if it is not possible, is it possible to modify the cockpit and add the G1000 of the basic cessna of fsx for example? I really like the Pilatus and all the variants of this plane and I could be very fun to have the G950 last version of this beast that was released just before it was retired. I already tried to do this with a freeware version of the plane but I'm not a dev so no success...
Attachments
2c98ec0901fc9d2a384c8f94ce50a6e9-PC-6-37.jpg
2c98ec0901fc9d2a384c8f94ce50a6e9-PC-6-37.jpg (165.31 KiB) Viewed 1379 times

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by doodlebug » Tue Feb 18, 2020 10:40 pm

-I don't really understand how the engine works and really often the engine explode, can you help me?
keep an eye on the digital gauges - if they flash, it means you are over-stressing the engine

jmv.carron
Posts: 19
Joined: Mon Feb 03, 2020 10:36 am
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by jmv.carron » Thu Feb 20, 2020 2:53 pm

doodlebug wrote:
Tue Feb 18, 2020 10:40 pm
-I don't really understand how the engine works and really often the engine explode, can you help me?
keep an eye on the digital gauges - if they flash, it means you are over-stressing the engine
I already know that but even if they don't flash sometimes the turbine explodes. What about my other questions? Will someone answer? Thank you and sorry if my english is not good ;)

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by doodlebug » Thu Feb 20, 2020 3:50 pm

I'll ask a dev to comment on the ball gauge & liveries
Simulating the G950 would require a very large development investment which would be hard to recoup.
If you know of an existing G950 addon you may contact its developers and if they can supply us with the 3D assets, we will consider adding support for it.
The beta range should be explained in the manual. Lte me know if it isn't.
Exploding engines:
Are you watching your engine health in the MVAMS utility?
Are you flying in extreme conditions (hot)?

Chuck Jodry
Posts: 442
Joined: Mon Dec 20, 2010 4:30 pm
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by Chuck Jodry » Thu Feb 20, 2020 4:03 pm

Regarding liveries , all offered for P3D will work in Steam , the ball was working as expected when I tested it and I suspect an autorudder setting is the reason you see something I do not .

Best CJ

jmv.carron
Posts: 19
Joined: Mon Feb 03, 2020 10:36 am
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by jmv.carron » Thu Feb 20, 2020 6:50 pm

Thank you guys for the answers ! I'm going to check for the turbine !

edo.dona
Posts: 3
Joined: Tue Feb 11, 2020 7:07 pm
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by edo.dona » Tue Feb 25, 2020 6:57 pm

Hello, i bought the PC-6 from the milviz store a couple of days ago and the mvams cause CTD because when i change something for example i want to make the pilatus cargo or i want to add the radar when i load the flight fsx crash can you help please ?
Thanks sorry for bad english

User avatar
doodlebug
Posts: 1642
Joined: Sun Feb 19, 2017 2:49 pm
Location: LYX>YUL
Re: PC 6 Steam Edition ne fonctionne pas correctement

Post by doodlebug » Thu Feb 27, 2020 5:45 pm

This behaviour is unusual - can you do two things for us?
  1. Go to the following URL and run through the troubleshooter to eliminate the most usual problems:
    https://milviz.com/support/index.php?p=39&w=0&s=3
  2. Let us know your system specs and what other addons you are running


Locked

Return to “Pilatus PC-6 (FSX) Support Forum”