MV 407 Support Forum
-
- Site Admin
- Posts: 1728
- Joined: Mon Sep 08, 2008 4:18 pm
MV 407 Support Forum
Hi and welcome to the MV 407 support forum.
Any and all questions concerning the flight, operation and problems are allowed and welcome here.
However, do note that we reserve the right to refuse to fix certain issues. (no idea what those may be but... we reserve the right)
Thanks
Any and all questions concerning the flight, operation and problems are allowed and welcome here.
However, do note that we reserve the right to refuse to fix certain issues. (no idea what those may be but... we reserve the right)
Thanks
-
- Posts: 7
- Joined: Tue Sep 09, 2014 12:03 pm
Re: MV 407 Support Forum
ok lets start.this is my first visit to this forum.thanks to steve and collin to get an account.so here my problem with the 407.after the startup procedure at point 11 called
press and hold start switch no rpm indicator no spinning rotor.only hear the engine but nothing happen and the engine started again and again.so i tell you what ive done to run the tips ive got.deactivated the weather.no result.deactivated the antivir to download.try to start with ctrl+e, impossible.move the 407 to 180 degrees cause the wind no result.ive win 7 64bit and a very fast pc.what can ido ?
the best
frank
press and hold start switch no rpm indicator no spinning rotor.only hear the engine but nothing happen and the engine started again and again.so i tell you what ive done to run the tips ive got.deactivated the weather.no result.deactivated the antivir to download.try to start with ctrl+e, impossible.move the 407 to 180 degrees cause the wind no result.ive win 7 64bit and a very fast pc.what can ido ?
the best
frank
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: MV 407 Support Forum
Sounds like the fuel switch is off .
Best CJ
Best CJ
-
- Posts: 7
- Joined: Tue Sep 09, 2014 12:03 pm
Re: MV 407 Support Forum
thanks for help but the fuel valve is on.is there eventualy another startup procedure.
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: MV 407 Support Forum
Did you set the ACM for cold and dark startup and load the 407 or did you load a saved flight with another aircraft and then switch to the 407 ?
Try loading the 407 from the selection menu if you used a saved flight .
Thanks CJ
Try loading the 407 from the selection menu if you used a saved flight .
Thanks CJ
-
- Posts: 7
- Joined: Tue Sep 09, 2014 12:03 pm
Re: MV 407 Support Forum
it doesnt work both.its always the same.after startup processed all only hear the engine.the mgt goes to 814 than back to zero and hear the engine start again.
frank
frank
-
- Posts: 442
- Joined: Mon Dec 20, 2010 4:30 pm
Re: MV 407 Support Forum
Hello Frank , the start switch has a release function as well , the switch needs to be centered after use , click , hold, release or the inertial starter keeps going .
Question , the fuel booster switches are on ?
We will get you started yet !
Question , the fuel booster switches are on ?
We will get you started yet !
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: MV 407 Support Forum
Try pressing Ctrl F4 for full mixture as well.
-
- Posts: 7
- Joined: Tue Sep 09, 2014 12:03 pm
Re: MV 407 Support Forum
hello helpers,
followed all advises but unhelpful.the problem is still there.
thanks
frank
followed all advises but unhelpful.the problem is still there.
thanks
frank
-
- Posts: 3446
- Joined: Sat Mar 13, 2010 7:38 pm
Re: MV 407 Support Forum
Sorry not Ctrl F4 but Ctrl Shift F4.
-
- Site Admin
- Posts: 1728
- Joined: Mon Sep 08, 2008 4:18 pm
Re: MV 407 Support Forum
turn on the fuel pump
turn on the fuel boosters
turn on the battery
turn on the hydraulics
click the start switch TWICE
watch your N1.
once it gets as far as it seems to go, try clicking on the throttle (cyclic) and rotate that until it says FLY.
turn on the fuel boosters
turn on the battery
turn on the hydraulics
click the start switch TWICE
watch your N1.
once it gets as far as it seems to go, try clicking on the throttle (cyclic) and rotate that until it says FLY.
-
- Posts: 7
- Joined: Tue Sep 09, 2014 12:03 pm
Re: MV 407 Support Forum
hello,
idont know what happen but i think ive solved the problem.load the cessna 172 put the white tank selector to both (normal is on left)and save the flight to standard.then load the helicopter and it works.
thanks so much
frank
idont know what happen but i think ive solved the problem.load the cessna 172 put the white tank selector to both (normal is on left)and save the flight to standard.then load the helicopter and it works.
thanks so much
frank
-
- Posts: 7
- Joined: Tue Sep 09, 2014 12:03 pm
Re: MV 407 Support Forum
hello,
once more to the startup problem.i think ist very important to get a good standard flight so the cessna 172.weather was not the problem.the next problem is kaspersky regognize the acm as a virus.its not so bad but akward. want to use the acm i must new install complete with the helicopter.so i save the hole file particularly the aircraft cfg.deactivated kaspersky and install new.open the acm and set all types to cold and dark.after activated kaspersky acm is a trojan again but it doesnt matter.you have saved the variants before.but if you install a new repaint you must start the hole procedure again.hope i can help others so.
good flights
frank
once more to the startup problem.i think ist very important to get a good standard flight so the cessna 172.weather was not the problem.the next problem is kaspersky regognize the acm as a virus.its not so bad but akward. want to use the acm i must new install complete with the helicopter.so i save the hole file particularly the aircraft cfg.deactivated kaspersky and install new.open the acm and set all types to cold and dark.after activated kaspersky acm is a trojan again but it doesnt matter.you have saved the variants before.but if you install a new repaint you must start the hole procedure again.hope i can help others so.
good flights
frank
-
- Posts: 1023
- Joined: Mon Sep 06, 2010 3:47 pm
Re: MV 407 Support Forum
Configure your kapersky anti-virus to exclude the ACM entirely. Problem solved.
-
- Posts: 7
- Joined: Tue Sep 09, 2014 12:03 pm
Re: MV 407 Support Forum
thank you bill it works
the best
frank
the best
frank